Essence We.R Guida Utente

WeR@Home™ System User Guide ESUG05022 Version 3.4 September 2014

Table of Contents 10 WeR@Home™ System User Guide 5.1.4.2 Removing the Old Battery ...

Installation of the WeR@Home™ System 100 WeR@Home™ System User Guide Figure 70: Releasing the Motion Detector Wall Mounting Base 3.7.2.1 Motio

Installation of the WeR@Home™ System System User Guide 101 n The Motion Detector should not be facing sunlight or other strong light sources in

Installation of the WeR@Home™ System 102 WeR@Home™ System User Guide demonstrated in Figure 70 above. 2. For Flat Wall Mounting: i. Use a flat

Installation of the WeR@Home™ System System User Guide 103 Figure 72: Dismounting the Motion Detector 3.7.3 Adding the Motion Detector to the

Installation of the WeR@Home™ System 104 WeR@Home™ System User Guide Figure 73: Add Motion Detector Device Utilizing Web Application Note: Yo

Installation of the WeR@Home™ System System User Guide 105 Figure 74: Add Motion Detector Window 7. Verify that the Device Type is Motion De

Installation of the WeR@Home™ System 106 WeR@Home™ System User Guide Note: In case the installation of the batteries could not be accomplished w

Installation of the WeR@Home™ System System User Guide 107 Figure 77: Add New Motion Detector Device Properties Clicking over the button wil

Installation of the WeR@Home™ System 108 WeR@Home™ System User Guide t Motion Detector arming scenarios t Armed Motion Detector response t Una

Installation of the WeR@Home™ System System User Guide 109 3.7.4.2 The Normal Operation Mode Following the termination of the Walk Test Mode (i

Table of Contents WeR@Home™ System User Guide 11 Appendix G Pairing and Bonding ...

Installation of the WeR@Home™ System 110 WeR@Home™ System User Guide 3.8.1 The Magnetic Sensor Function The Magnetic Sensor incorporates the fol

Installation of the WeR@Home™ System System User Guide 111 The mounting base, of both parts, is the Magnetic Sensor back cover (in the Transmitt

Installation of the WeR@Home™ System 112 WeR@Home™ System User Guide Figure 82: Dot Alignment of the Magnetic Sensor Units 3.8.2.2 Installing

Installation of the WeR@Home™ System System User Guide 113 5. Attach the Transmitter Unit back to its base. 3.8.2.3 Installing with Pre-attac

Installation of the WeR@Home™ System 114 WeR@Home™ System User Guide Figure 84: Dismounting the Magnetic Sensor’s Transmitter 3.8.3 Adding th

Installation of the WeR@Home™ System System User Guide 115 Figure 85: Add Magnetic Sensor Device Utilizing Web Application 4. A roll-down sel

Installation of the WeR@Home™ System 116 WeR@Home™ System User Guide 8. The down-counter provides a time-frame of three (3) minutes within which

Installation of the WeR@Home™ System System User Guide 117 Figure 88: Add New Magnetic Sensor Timeout Error Message In such a case, it is poss

Installation of the WeR@Home™ System 118 WeR@Home™ System User Guide is added onto the system configuration. 12. Clicking over the button will

Installation of the WeR@Home™ System System User Guide 119 is added onto the system configuration with more detailed definitions. 13. You may

Table of Contents 12 WeR@Home™ System User Guide This page was intentionally left blank

Installation of the WeR@Home™ System 120 WeR@Home™ System User Guide Figure 91: The Indoor Siren n Uses four (4) standard AA-size Alkaline bat

Installation of the WeR@Home™ System System User Guide 121 3.9.2 Installing the Siren The Indoor Siren is designed be mounted on a vertical wal

Installation of the WeR@Home™ System 122 WeR@Home™ System User Guide n Attach the Siren to a surface that is clean, dry, flat and smooth. n Loc

Installation of the WeR@Home™ System System User Guide 123 demonstrated in Figure 93 above. 2. Use a flat screwdriver to remove the punch-outs

Installation of the WeR@Home™ System 124 WeR@Home™ System User Guide Figure 94: Dismounting the Indoor Siren 3.9.3 Adding the Indoor Siren to

Installation of the WeR@Home™ System System User Guide 125 Note: You may also want to refer to paragraph 5.1 below to get acquainted with the

Installation of the WeR@Home™ System 126 WeR@Home™ System User Guide Figure 96: Add Indoor Siren Window 7. Verify that the Device Type is Sire

Installation of the WeR@Home™ System System User Guide 127 Note: The Siren will double-beep following the insertion of the first two (2) consec

Installation of the WeR@Home™ System 128 WeR@Home™ System User Guide 11. If the new Siren was properly detected by the CCU within this time-fram

Installation of the WeR@Home™ System System User Guide 129 Figure 100: The Tag Reader and a Tag 3.10.1 The Tag Reader Function The Tag Reader

Introduction System User Guide 13 1. Introduction Welcome to the WeR@Home™ Smart Home System User Guide. The WeR@Home™ Smart Home system enable

Installation of the WeR@Home™ System 130 WeR@Home™ System User Guide 3.10.2 Installing the Tag Reader The Tag Reader should be mounted near the

Installation of the WeR@Home™ System System User Guide 131 ˜ Install outdoor (i.e. near the front door), the Tag Reader serves as a door bell (

Installation of the WeR@Home™ System 132 WeR@Home™ System User Guide 3. Drill the holes; insert three (3) dowels if needed, place the base over

Installation of the WeR@Home™ System System User Guide 133 Figure 103: Dismounting the Tag Reader 3.10.3 Adding the Tag Reader to the WeR@Hom

Installation of the WeR@Home™ System 134 WeR@Home™ System User Guide 2. Activate the WeR@Home™ Web Application. 3. Select the Devices page (tab

Installation of the WeR@Home™ System System User Guide 135 Figure 105: Add Tag Reader Window 8. The down-counter provides a time-frame of thr

Installation of the WeR@Home™ System 136 WeR@Home™ System User Guide Note: In case the installation of the batteries could not be accomplished

Installation of the WeR@Home™ System System User Guide 137 Figure 108: Add New Tag Reader Device Properties 12. Clicking over the button wi

Installation of the WeR@Home™ System 138 WeR@Home™ System User Guide 15. You may verify that the Tag Reader (TR5) was properly added by checking

Installation of the WeR@Home™ System System User Guide 139 Figure 111: Add Tag Device Utilizing Web Application 3. Click over the _Add Tag_ o

Introduction 14 WeR@Home™ System User Guide 1.2. General Guidelines Following are some general guidelines for the installation and day-by-day u

Installation of the WeR@Home™ System 140 WeR@Home™ System User Guide Figure 112: Add Tag Window 5. To assign the Tag to a User, click over the

Installation of the WeR@Home™ System System User Guide 141 Figure 114: Tag Label and Stopwatch Window Type-in (optionally) a Tag Label name a

Installation of the WeR@Home™ System 142 WeR@Home™ System User Guide Figure 115: Add New Tag Timeout Error Message In such a case, it is possib

Installation of the WeR@Home™ System System User Guide 143 Figure 116: The Flood Detector 3.11.1 The Flood Detector Function The Flood Detect

Installation of the WeR@Home™ System 144 WeR@Home™ System User Guide 3.11.2 Installing the Flood Detector The Flood Detector should be mounted

Installation of the WeR@Home™ System System User Guide 145 n Attach the Flood Detector (applicable for both parts) to a surface that is clean,

Installation of the WeR@Home™ System 146 WeR@Home™ System User Guide 3.11.2.3 Installing the Flood Detector Sensor Unit with Screws 1. Place an

Installation of the WeR@Home™ System System User Guide 147 3.11.2.6 Dismounting the Flood Detector For dismounting the Flood Detector (Transmit

Installation of the WeR@Home™ System 148 WeR@Home™ System User Guide 1. Prepare a single AA-size Alkaline battery required to power the Flood De

Installation of the WeR@Home™ System System User Guide 149 Figure 122: Add Flood Detector Window 7. Verify that the Device Type is Flood Dete

Introduction System User Guide 15 Product Description Central Control Unit (CCU) – Essence ES8000CP The WeR@Home™ Central Control Unit. Somet

Installation of the WeR@Home™ System 150 WeR@Home™ System User Guide Figure 123: Inserting a Battery into the Flood Detector 10. If the CCU di

Installation of the WeR@Home™ System System User Guide 151 Clicking over the button will terminate the Add New Device process. 11. If the ne

Installation of the WeR@Home™ System 152 WeR@Home™ System User Guide Smoke detection triggers: n A loud piezoelectric buzzer (85 dBA at 3 mete

Installation of the WeR@Home™ System System User Guide 153 WARNING! Never disable the Smoke Detector device and never remove the batteries to

Installation of the WeR@Home™ System 154 WeR@Home™ System User Guide WARNING! Do not use this Smoke Detector device in non-residential buildings

Installation of the WeR@Home™ System System User Guide 155 Figure 127: Smoke Detectors in Single Bedroom Area Figure 128: Smoke Detectors in

Installation of the WeR@Home™ System 156 WeR@Home™ System User Guide Figure 129: Smoke Detectors in Multi-floor House t Install Smoke Detectors

Installation of the WeR@Home™ System System User Guide 157 the developed water drops may cause nuisance alarms. Install Smoke Detectors at least

Installation of the WeR@Home™ System 158 WeR@Home™ System User Guide Note: The Smoke Detector base include four (4) holes for screws for flexib

Installation of the WeR@Home™ System System User Guide 159 Note: Prevent dust from getting into the Smoke Detector while drilling the holes! 4

Introduction 16 WeR@Home™ System User Guide Product Description Motion Detector (PIR) – Essence ES800PIR A Passive Infra-Red (PIR) Motion Detec

Installation of the WeR@Home™ System 160 WeR@Home™ System User Guide of the detection chamber. Use the soft brush of the vacuum cleaner to remove

Installation of the WeR@Home™ System System User Guide 161 Note: You may also want to refer to paragraph 5.1 below to get acquainted with the

Installation of the WeR@Home™ System 162 WeR@Home™ System User Guide 6. Verify that the Device Type is Smoke Detector. Figure 134: Add Smoke

Installation of the WeR@Home™ System System User Guide 163 Figure 135: Inserting a Batteries into the Smoke Detector Verify batteries’ polarit

Installation of the WeR@Home™ System 164 WeR@Home™ System User Guide Figure 136: Omni-directional Assembly of the Smoke Detector 9. Line-up th

Installation of the WeR@Home™ System System User Guide 165 Note: When the batteries make the initial contact with the Smoke Detector electronic

Installation of the WeR@Home™ System 166 WeR@Home™ System User Guide Figure 138: Add New Smoke Detector Device Properties 15. You may verify t

Installation of the WeR@Home™ System System User Guide 167 Figure 139: The Universal Transmitter Accessories available for the Universal Trans

Installation of the WeR@Home™ System 168 WeR@Home™ System User Guide n Data security is ensured with 128-bit AES encryption. n Up to 500m (1640

Installation of the WeR@Home™ System System User Guide 169 3.13.2.1 Universal Transmitter Positioning Recommendations For optimal safety, the f

Introduction System User Guide 17 Product Description Power Adapter Universal Switching Power Supply converting the mains voltage into DC powe

Installation of the WeR@Home™ System 170 WeR@Home™ System User Guide 3.13.2.3 Installing with Pre-attached Double-side Tape The pre-attached dou

Installation of the WeR@Home™ System System User Guide 171 3.13.3 Adding the Universal Transmitter to the WeR@Home™ System The Universal Transm

Installation of the WeR@Home™ System 172 WeR@Home™ System User Guide 5. Click over the _Add Universal Transmitter_ option of the menu as illustr

Installation of the WeR@Home™ System System User Guide 173 Figure 145: Add Universal Transmitter Window 10. Verify that the Device Type is Un

Installation of the WeR@Home™ System 174 WeR@Home™ System User Guide page 171) and onwards again. 13. The insertion of the battery into the Uni

Installation of the WeR@Home™ System System User Guide 175 Figure 148: Add New Flood Detector Device Properties Clicking over the button

Installation of the WeR@Home™ System 176 WeR@Home™ System User Guide environment of the residential house. Average communication distance between

Installation of the WeR@Home™ System System User Guide 177 ˜ A mini-USB™ socket, on its other end, for the Central Control Unit’s power adaptor

Installation of the WeR@Home™ System 178 WeR@Home™ System User Guide 3.14.3 Installing the Z-Wave® Controller Notes: The following procedure

Installation of the WeR@Home™ System System User Guide 179 3. Plug the We.R™ Z-Wave® dongle’s mini-USB™ connector into the Centra

Introduction 18 WeR@Home™ System User Guide Additional devices may be purchased from local distributors as required. These are described in para

Installation of the WeR@Home™ System 180 WeR@Home™ System User Guide 4. Plug the power adaptor’s cord (previously disconnected from the CCU)

Installation of the WeR@Home™ System System User Guide 181 The verification is done by activating the WeR@Home™ Web Application software (descr

Installation of the WeR@Home™ System 182 WeR@Home™ System User Guide Figure 150: The Smart Home Page Clicking over the button will open an _A

Installation of the WeR@Home™ System System User Guide 183 Figure 152: Add Z-Wave® Device Installation Stopwatch Similar to the standard WeR@H

Installation of the WeR@Home™ System 184 WeR@Home™ System User Guide Figure 153: A Dimmer Device Added 3.14.4.2 Removing a Connected Z-Wave® D

Installation of the WeR@Home™ System System User Guide 185 Figure 154: Removal Message for a Z-Wave® Device In case the device to be removed p

Installation of the WeR@Home™ System 186 WeR@Home™ System User Guide 5. Press the pairing button on the dimmer device. 6. Click over the butt

Installation of the WeR@Home™ System System User Guide 187 a) Click over the Scenarios tab to open the Scenarios page. b) Select which scenario

Installation of the WeR@Home™ System 188 WeR@Home™ System User Guide Figure 158: Setting up Z-Wave® Devices to Turn OFF upon Arming the System

Installation of the WeR@Home™ System System User Guide 189 Figure 159: Controlling a Z-Wave® Thermostat Note: Each FLiRS device (i.e. Doo

Introduction System User Guide 19 Product Description Smoke Detector (SK2) – Essence ES800SK2 The Smoke Detector is a stand-alone fire early w

Installation of the WeR@Home™ System 190 WeR@Home™ System User Guide 3.15. System Support Capabilities The WeR@Home™ Central Control Unit can sup

Installation of the WeR@Home™ System System User Guide 191 Note: Being central to the WeR@Home™ system configuration, the CCU is not enumerated

Installation of the WeR@Home™ System 192 WeR@Home™ System User Guide This page was intentionally left blank

Administration of the WeR@Home™ System System User Guide 193 4. Administration of the WeR@Home™ System Daily usage of the WeR@Home™ system invo

Administration of the WeR@Home™ System 194 WeR@Home™ System User Guide Figure 161: The WeR@Home™ Mobile Application’s Home Status Screen 4.1.1

Administration of the WeR@Home™ System System User Guide 195 Change of arming status is acknowledged by the status icon. In this mode of oper

Administration of the WeR@Home™ System 196 WeR@Home™ System User Guide 4.1.1.4 Disarm In addition to the above described status icon changing i

Administration of the WeR@Home™ System System User Guide 197 Figure 162: Triggering Arm Modes with Devices Disarming with the Wireless Access

Administration of the WeR@Home™ System 198 WeR@Home™ System User Guide 4.2.1 Security Alarms Once the system is armed (full arm or night arm or

Administration of the WeR@Home™ System System User Guide 199 Figure 164: Security Alarm Notification on the WeR@Home™ Mobile Application The

Legal Notice Usage of this document, and all information (including product information) provided within, are subject to the following terms and co

System Theory 20 WeR@Home™ System User Guide 2. System Theory The WeR@Home™ system transforms mobile smartphones and tablets, as well as persona

Administration of the WeR@Home™ System 200 WeR@Home™ System User Guide n Three (3) new buttons will be presented at the bottom of the screen to

Administration of the WeR@Home™ System System User Guide 201 Figure 167: Sending Images to Email Acknowledgement Window Tapping over the but

Administration of the WeR@Home™ System 202 WeR@Home™ System User Guide ˜ – disarming the system. 4.2.2 Safety Alarms Beside security, the We

Administration of the WeR@Home™ System System User Guide 203 Figure 170: Safety Alarm Notification on the WeR@Home™ Mobile Application The H

Administration of the WeR@Home™ System 204 WeR@Home™ System User Guide n The status icon will blink in orange, and n Two (2) new buttons wil

Administration of the WeR@Home™ System System User Guide 205 If a Panic Alarm was triggered, the User will receive an Alarm Notification on his

Administration of the WeR@Home™ System 206 WeR@Home™ System User Guide Figure 175: Panic Alarm Home Status Screen Where: n A Panic Alarm titl

Administration of the WeR@Home™ System System User Guide 207 Figure 176: Last Security Videos Selection Screen Where: t Tapping over the b

Administration of the WeR@Home™ System 208 WeR@Home™ System User Guide Figure 177: Camera Display Screen The button at the bottom of the scr

Administration of the WeR@Home™ System System User Guide 209 Tapping over the button will send the images via email to the User. Upon completi

System Theory System User Guide 21 2.2. The Complete System Overview Figure 3: The WeR@Home™ Cloud Computing Network The installed system com

Administration of the WeR@Home™ System 210 WeR@Home™ System User Guide 4.3.1 Monitoring with the WeR@Home™ Web Application The center pan of the

Administration of the WeR@Home™ System System User Guide 211 Figure 181: Camera’s Captured Images Presentation Once clicked upon, the button

Administration of the WeR@Home™ System 212 WeR@Home™ System User Guide Figure 182: The Take Video Screen To refresh the Available Cameras list –

Administration of the WeR@Home™ System System User Guide 213 Tapping over the button will terminate the comfort video session. The images pres

Administration of the WeR@Home™ System 214 WeR@Home™ System User Guide WeR@Home™ Mobile Application to the Comfort View of Camera screen (see abo

Administration of the WeR@Home™ System System User Guide 215 Also, there is a need to prepare password and User Code for this User. 4.4.2 Addi

Administration of the WeR@Home™ System 216 WeR@Home™ System User Guide Figure 187: The Users Page Data Pane ˜ The User Password (minimum of si

Administration of the WeR@Home™ System System User Guide 217 4.4.3 Removing Users Users may be removed from the system (by Master User only) by

Administration of the WeR@Home™ System 218 WeR@Home™ System User Guide 4.5.1 Adding New Devices Note: Adding Devices is possible only by a Mas

Administration of the WeR@Home™ System System User Guide 219 Figure 189: Add New Device Timer Window 5. The down-counter provides a time-fram

System Theory 22 WeR@Home™ System User Guide 2.3.1 Enhanced Controlled Open Protocol The WeR@Home™ products intercommunicate with the Central C

Administration of the WeR@Home™ System 220 WeR@Home™ System User Guide Figure 190: Add New Device Timeout Error Message Click over the button

Administration of the WeR@Home™ System System User Guide 221 4.5.3 Editing Devices’ Properties Note: Editing Devices’ properties is possible

Administration of the WeR@Home™ System 222 WeR@Home™ System User Guide Figure 191: Right Pane of Door/Window Magnetic Sensor Once all Device de

Administration of the WeR@Home™ System System User Guide 223 and a burglary alarm flow will start (notifications, emails etc.) n A premises exi

Administration of the WeR@Home™ System 224 WeR@Home™ System User Guide The detection of the Walk-Through device will be logged in the Recent Even

Administration of the WeR@Home™ System System User Guide 225 This page was intentionally left blank

Maintenance of the WeR@Home™ System 226 WeR@Home™ System User Guide 5. Maintenance of the WeR@Home™ System The WeR@Home™ system is almost mainte

Maintenance of the WeR@Home™ System System User Guide 227 Figure 192: Releasing the Back Cover Figure 193: Removing the Battery

Maintenance of the WeR@Home™ System 228 WeR@Home™ System User Guide 5.1.1.2 Installing a New Battery 1. Insert the new backup battery into the

Maintenance of the WeR@Home™ System System User Guide 229 5.1.2 Replacing the Camera (IPD) Batteries For its operation, the Camera needs three

System Theory System User Guide 23 Sensitivity Power -103 dBm (sensors) 14 dBm -103 dBm (Central Control Unit) 20 dBm

Maintenance of the WeR@Home™ System 230 WeR@Home™ System User Guide 1. To dismount the Camera, press the wall mounting base's tab at the bo

Maintenance of the WeR@Home™ System System User Guide 231 3. Return the Camera back onto its mounting base. The insertion of batteries into th

Maintenance of the WeR@Home™ System 232 WeR@Home™ System User Guide Figure 198: Dismounting the Motion Detector 2. The batteries’ (back) cover

Maintenance of the WeR@Home™ System System User Guide 233 Figure 199: Inserting Batteries into the Motion Detector 2. Return the Motion Detec

Maintenance of the WeR@Home™ System 234 WeR@Home™ System User Guide Figure 200: Dismounting the Magnetic Sensor’s Transmitter 5.1.4.2 Removing

Maintenance of the WeR@Home™ System System User Guide 235 Figure 201: Inserting a Battery into the Transmitter Unit The insertion of battery i

Maintenance of the WeR@Home™ System 236 WeR@Home™ System User Guide Figure 202: Dismounting the Siren 2. The mounting base (back cover) of the

Maintenance of the WeR@Home™ System System User Guide 237 To discharge the Siren, insert the back cover’s tab into the niche at the bottom of th

Maintenance of the WeR@Home™ System 238 WeR@Home™ System User Guide Figure 204: Inserting Batteries into the Siren The insertion of batteries

Maintenance of the WeR@Home™ System System User Guide 239 5.1.6.1 Removing the Old Battery 1. Release the cover of the KF battery compartment

System Theory 24 WeR@Home™ System User Guide Operators can exercise full real-time control over all system functions, overview the full picture r

Maintenance of the WeR@Home™ System 240 WeR@Home™ System User Guide Figure 206: Inserting the New KF’s Battery Note: There is no need to perfo

Maintenance of the WeR@Home™ System System User Guide 241 Figure 207: Dismounting the Tag Reader Note: The Tags are passive components and ne

Maintenance of the WeR@Home™ System 242 WeR@Home™ System User Guide Figure 208: Inserting Batteries into the Tag Reader 2. Return the Tag Reade

Maintenance of the WeR@Home™ System System User Guide 243 Figure 209: Dismounting the Flood Detector’s Transmitter 5.1.8.1. Removing the Old

Maintenance of the WeR@Home™ System 244 WeR@Home™ System User Guide Return the cover onto the base and click it in. 32. The insertion of batter

Maintenance of the WeR@Home™ System System User Guide 245 Figure 211: Dismounting the Smoke Detector 5.1.9.2 Removing the Old Batteries Remov

Maintenance of the WeR@Home™ System 246 WeR@Home™ System User Guide 5.1.9.3 Installing New Batteries 1. Install the new batteries as demonstrat

Maintenance of the WeR@Home™ System System User Guide 247 5.1.10.1 Dismounting the Universal Transmitter There is a need to dismount the Univer

Maintenance of the WeR@Home™ System 248 WeR@Home™ System User Guide 5.1.10.3. Installing a New Battery 1. The battery should be installed, as d

Maintenance of the WeR@Home™ System System User Guide 249 This filter accumulates dirt which must be removed periodically Carefully remove any

System Theory System User Guide 25 The applications are high-end Rich Internet Applications (RIA), scalable and designed for a smooth user exper

Security Aspects 250 WeR@Home™ System User Guide 6. Security Aspects 6.1. Secured Communication between User and Application Server n Authenti

Security Aspects System User Guide 251 This page was intentionally left blank

Terms, Abbreviations and Acronyms 252 WeR@Home™ System User Guide Appendix A Terms, Abbreviations and Acronyms Term Description 3G 3G is a short

Terms, Abbreviations and Acronyms System User Guide 253 CP An Essence Term. Control Panel. See Central Control Unit (CCU). DC Direct Current DIY

Terms, Abbreviations and Acronyms 254 WeR@Home™ System User Guide A standard network protocol used to transfer files from one host to another hos

Terms, Abbreviations and Acronyms System User Guide 255 JSON JavaScript Object Notation. A text-based open standard designed for human-readable

Terms, Abbreviations and Acronyms 256 WeR@Home™ System User Guide Web application with many characteristics of desktop application software, typi

Terms, Abbreviations and Acronyms System User Guide 257 this purpose. SMTP Simple Mail Transfer Protocol. An Internet standard for electronic ma

Terms, Abbreviations and Acronyms 258 WeR@Home™ System User Guide User data is interspersed in-band with Telnet control information in an 8-bit b

Terms, Abbreviations and Acronyms System User Guide 259 connections. XML Extensible Markup Language. A markup language that defines a set of rul

System Theory 26 WeR@Home™ System User Guide This page was intentionally left blank

End User License Agreement (EULA) 260 WeR@Home™ System User Guide Appendix B End User License Agreement (EULA) Definitions The following terms w

End User License Agreement (EULA) System User Guide 261 other products; personalized information, including advertisements, from third parties,

End User License Agreement (EULA) 262 WeR@Home™ System User Guide violation of the Terms and Conditions. Article III – DISCLAIMER OF WARRANTIES a

End User License Agreement (EULA) System User Guide 263 THE SYSTEM (THE "INFORMATION") (INCLUDING BUT NOT LIMITED TO VIDEO SEGMENTS FI

End User License Agreement (EULA) 264 WeR@Home™ System User Guide device will work only in areas where the cellular service has coverage and Comp

End User License Agreement (EULA) System User Guide 265 participate in any class action against Company, its subcontractors, distributors, licen

End User License Agreement (EULA) 266 WeR@Home™ System User Guide provision is found to be invalid or unenforceable for any reason, that provisio

End User License Agreement (EULA) System User Guide 267 third party website, including a website owned or operated by you, we may record data re

End User License Agreement (EULA) 268 WeR@Home™ System User Guide If you have any concerns or questions about this Privacy Policy, please contact

End User License Agreement (EULA) System User Guide 269 This page was intentionally left blank

Installation of the WeR@Home™ System System User Guide 27 3. Installation of the WeR@Home™ System 3.1. Prerequisites Prior to the installation

Technical Specifications 270 WeR@Home™ System User Guide Appendix C Technical Specifications Central Control Unit (CCU) – ES8000CP Communicatio

Technical Specifications System User Guide 271 Certification n FCC IC Comments Y4I-ES8000CP no cellular version YXG-ES8000GP 11061A-ES8000GP

Technical Specifications 272 WeR@Home™ System User Guide n Efficient power consumption to extend the operation period n Three (3) AA-size alkal

Technical Specifications System User Guide 273 n Supports automatic over-the-air software upgrade (RSU) programming and configuration n Temper

Technical Specifications 274 WeR@Home™ System User Guide n Unique electronic serial number n Supports automatic over-the-air software upgrade (

Technical Specifications System User Guide 275 Security n Tamper Alarm – if removed from back bracket n Data Security – 128bit AES encryption

Technical Specifications 276 WeR@Home™ System User Guide Security n Data Security – 128-bit AES encryption n Unique electronic serial number Po

Technical Specifications System User Guide 277 n Tamper Alarm – when detached from wall n Data Security – 128-bit AES encryption n Unique ele

Technical Specifications 278 WeR@Home™ System User Guide Security n Data Security – 128-bit AES encryption n Unique electronic serial number n

Technical Specifications System User Guide 279 n Modulation and Frequency: DSSS, 2.4GHz Security n Tamper Alarm – when detached from base n M

Installation of the WeR@Home™ System 28 WeR@Home™ System User Guide n A smartphone (optional) for remote system management. n A small screwdri

Technical Specifications 280 WeR@Home™ System User Guide Universal Transmitter (UT) – ES800UT Communication n Maximum RF range 500m (1640ft.) op

Technical Specifications System User Guide 281 Z-Wave® Controller (ZWD) – ES800ZWD Communication n Maximum RF range 500m (1640ft.) open air

Technical Specifications 282 WeR@Home™ System User Guide This page was intentionally left blank

Port Checking System User Guide 283 Appendix D Port Checking To check the availability of port 43001, exercise the following steps: 1. Click o

Port Checking 284 WeR@Home™ System User Guide Figure 218: Telnet Search Command e)Press the Enter key. If the port check is successful, a blan

Enable Telnet Program in Windows 7 and 8 System User Guide 285 Appendix E Enable Telnet Program in Windows 7 and 8 Exercise the following steps

Enable Telnet Program in Windows 7 and 8 286 WeR@Home™ System User Guide This page was intentionally left blank

Screws and Dowels System User Guide 287 Appendix F Screws and Dowels Except for the Central Control and its Remote Control Units, as well as th

Screws and Dowels 288 WeR@Home™ System User Guide This page was intentionally left blank

Pairing and Bonding System User Guide 289 Appendix G Pairing and Bonding Motivation Many of the services offered over wireless communication su

Installation of the WeR@Home™ System System User Guide 29 It is arranged in the exact same sequence the system needs to be built-up, including

Owner’s Records 290 WeR@Home™ System User Guide Appendix H Owner’s Records This appendix was added for the system owner to concentrate all recor

Owner’s Records System User Guide 291 This page was intentionally left blank

Table of Contents WeR@Home™ System User Guide 3 How to Use this Guide The backbone of this guide is the WeR@Home™ installation procedure – follo

Installation of the WeR@Home™ System 30 WeR@Home™ System User Guide It is a two-way, wireless Central Control Unit comprising the main element

Installation of the WeR@Home™ System System User Guide 31 3.2.2.1 CCU Positioning Recommendations The CCU should be installed on: n A flat su

Installation of the WeR@Home™ System 32 WeR@Home™ System User Guide Figure 7: Insertion of LAN Cable into the CCU Socket The CCU back panel L

Installation of the WeR@Home™ System System User Guide 33 Figure 8: Insertion of the Backup Battery Return the battery cover back to place

Installation of the WeR@Home™ System 34 WeR@Home™ System User Guide Note: The initial registration is a web-only procedure and therefore could

Installation of the WeR@Home™ System System User Guide 35 2. The Login window will pop-up: Figure 9: The WeR@Home™ Web Application Login Wi

Installation of the WeR@Home™ System 36 WeR@Home™ System User Guide Figure 10: The Login Window with the Roll-down Menu Click over the _Go

Installation of the WeR@Home™ System System User Guide 37 In case the CCU was previously incompletely registered and this procedure started be

Installation of the WeR@Home™ System 38 WeR@Home™ System User Guide Figure 15: First Time Registration Step 2 Window Note: You may want to

Installation of the WeR@Home™ System System User Guide 39 i. _Name_ – The User Name you will be identified with in the system. This is a case

Table of Contents 4 WeR@Home™ System User Guide This page was intentionally left blank

Installation of the WeR@Home™ System 40 WeR@Home™ System User Guide Figure 16: Registration Confirmation Message Window Within a period of ap

Installation of the WeR@Home™ System System User Guide 41 Figure 17: APN Settings Window Most market available SIM-card’s APN data is pre-pro

Installation of the WeR@Home™ System 42 WeR@Home™ System User Guide iii. Manually type-in all the APN data retrieved from the Cellular Service

Installation of the WeR@Home™ System System User Guide 43 The run-time environment for Silverlight® is available as a plug-in for most web brow

Installation of the WeR@Home™ System 44 WeR@Home™ System User Guide n Notifications – Tamper, Low battery, Connection Lost, power failure/resto

Installation of the WeR@Home™ System System User Guide 45 3.3.3 The Web Application Display Structure The screen of the WeR@Home™ Web Applicati

Installation of the WeR@Home™ System 46 WeR@Home™ System User Guide 3.3.4 The Tool Bar The Tool bar provides access to the global most common We

Installation of the WeR@Home™ System System User Guide 47 Figure 21: The Settings Configuration Window This window is a sub-set of the initia

Installation of the WeR@Home™ System 48 WeR@Home™ System User Guide Figure 22: Manual Entry of APN Data Window n The button opens this WeR@H

Installation of the WeR@Home™ System System User Guide 49 (grey) System Disarmed (green) System (fully) Armed (red) Burglary Alarm (green) Syste

Table of Contents WeR@Home™ System User Guide 5 Table of Contents 1. Introduction ...

Installation of the WeR@Home™ System 50 WeR@Home™ System User Guide Figure 25: Data Window 6-Tab Bar These cases will be discussed within the r

Installation of the WeR@Home™ System System User Guide 51 n The Devices (left) pane – an overview pane graphically (using icons) presenting all

Installation of the WeR@Home™ System 52 WeR@Home™ System User Guide Z-Wave® device type Doorlock Z-Wave® device type Switch or Dimmer Z-Wave®

Installation of the WeR@Home™ System System User Guide 53 n The Recent Events (right) pane – a detailed pane graphically (utilizing icons) pre

Installation of the WeR@Home™ System 54 WeR@Home™ System User Guide Figure 28: The Dashboard Page with Z-Wave® Controller 3.3.6.2 The Devic

Installation of the WeR@Home™ System System User Guide 55 Figure 29: The Devices Page This page divides into two (2) panes: n The Devices (l

Installation of the WeR@Home™ System 56 WeR@Home™ System User Guide Master User(s) may also add new device(s) to the system by clicking over the

Installation of the WeR@Home™ System System User Guide 57 n The Events (left) overview left pane displaying, in sequential order, all recorded

Installation of the WeR@Home™ System 58 WeR@Home™ System User Guide To clear previous filter data – click over the button. The characteristics

Installation of the WeR@Home™ System System User Guide 59 Figure 32: The Users Page Once any of the above data fields have been changed; there

Table of Contents 6 WeR@Home™ System User Guide 3.3.4 The Tool Bar ...

Installation of the WeR@Home™ System 60 WeR@Home™ System User Guide 3.3.6.6 Other Pages As the WeR@Home™ system gains more and more applications

Installation of the WeR@Home™ System System User Guide 61 It features the following home management functions: n Push notifications for trigger

Installation of the WeR@Home™ System 62 WeR@Home™ System User Guide Figure 33: The Login Screen Similar to the First Time Registration procedur

Installation of the WeR@Home™ System System User Guide 63 Key Name Icon Description Backspace Used to erase characters. Uppercase Used for glo

Installation of the WeR@Home™ System 64 WeR@Home™ System User Guide 3.4.3 Using the Mobile Application The installation of the WeR@Home™ Mobile

Installation of the WeR@Home™ System System User Guide 65 Type-in the 4-digits User Code set during the registration procedure described in the

Installation of the WeR@Home™ System 66 WeR@Home™ System User Guide 1. The icon on the top-left side of the screen is a RF signal strength met

Installation of the WeR@Home™ System System User Guide 67 This page provides the WeR@Home™ Mobile Application software version, the registered U

Installation of the WeR@Home™ System 68 WeR@Home™ System User Guide Note: Definition of arming modes is set via the WeR@Home™ Web Application o

Installation of the WeR@Home™ System System User Guide 69 above Figure 36). n The Video Tab/screen allows comfort (non-alarm triggered, initiat

Table of Contents WeR@Home™ System User Guide 7 3.7.2.3 Installing with Pre-attached Double-side Tape ...

Installation of the WeR@Home™ System 70 WeR@Home™ System User Guide Figure 41: Comfort View of Camera n The Devices Tab/screen opens a status s

Installation of the WeR@Home™ System System User Guide 71 Tapping over the button refreshes the content of this status screen. The devices’ ic

Installation of the WeR@Home™ System 72 WeR@Home™ System User Guide These icons may: t Change their color in accordance with their reported even

Installation of the WeR@Home™ System System User Guide 73 Note: As mentioned before, the WeR@Home™ Mobile Application allows devices’ status di

Installation of the WeR@Home™ System 74 WeR@Home™ System User Guide directly from this screen by tapping over the button. For devices which may

Installation of the WeR@Home™ System System User Guide 75 t Expansion screen for Thermostat class devices: Figure 45: Thermostat Class Device

Installation of the WeR@Home™ System 76 WeR@Home™ System User Guide n The History Tab/screen opens a screen presenting the complete log of the s

Installation of the WeR@Home™ System System User Guide 77 Figure 47: Events History Screen with Filter Tool Bar The tool bar provides four (4)

Installation of the WeR@Home™ System 78 WeR@Home™ System User Guide Tapping over this button will open the following screen: Figure 49: Devices

Installation of the WeR@Home™ System System User Guide 79 Figure 50: Events’ Criteria Selection Screen t Presented in this screen is a log of

Table of Contents 8 WeR@Home™ System User Guide 3.11.2.2 Installing the Flood Detector Transmitter Unit with Screws ... 1

Installation of the WeR@Home™ System 80 WeR@Home™ System User Guide 3.5. The Remote Control Unit (KF) – ES800KF The Remote Control Unit (KF) is

Installation of the WeR@Home™ System System User Guide 81 n Remote deactivation in case of loss or theft. n Powered by a single 3V CR2450 lith

Installation of the WeR@Home™ System 82 WeR@Home™ System User Guide 3. Remove the cover. 4. Activate the Web Application. 5. Click over the De

Installation of the WeR@Home™ System System User Guide 83 7. Add Device window will pop-up (see Figure 56 below). 8. Verify that Device Type i

Installation of the WeR@Home™ System 84 WeR@Home™ System User Guide below. Figure 57: Inserting the Remote Control Unit’s Battery 15. Seal th

Installation of the WeR@Home™ System System User Guide 85 LED (under key) Status Duration Description Status ON red Short A quick press on the

Installation of the WeR@Home™ System 86 WeR@Home™ System User Guide Figure 58: The Motion Indoor Photo Detector 3.6.1 The Motion Indoor Photo

Installation of the WeR@Home™ System System User Guide 87 insects, and pets (optional) for reduction of false alarms. n Utilizes multi-zone sph

Installation of the WeR@Home™ System 88 WeR@Home™ System User Guide Figure 59: Releasing the Camera Wall Mounting Base 3.6.2.1 Camera Position

Installation of the WeR@Home™ System System User Guide 89 opposite to a window. n The Camera should be placed in a position where it will captu

Table of Contents WeR@Home™ System User Guide 9 4.1.1.2 Day Arm ...

Installation of the WeR@Home™ System 90 WeR@Home™ System User Guide Figure 60: Camera Wall-mounting Base with Screws 3. For Corner Mounting:

Installation of the WeR@Home™ System System User Guide 91 3.6.2.4 Dismounting the Camera Figure 61: Dismounting the Camera 3.6.3 Adding the

Installation of the WeR@Home™ System 92 WeR@Home™ System User Guide 2. Assuming the wall mounting base is already installed – release the batter

Installation of the WeR@Home™ System System User Guide 93 Figure 63: Add Camera Device Utilizing Web Application 8. An Add New Device (Camer

Installation of the WeR@Home™ System 94 WeR@Home™ System User Guide installed to power-up the camera, as demonstrated in Figure 65 below (the Ë p

Installation of the WeR@Home™ System System User Guide 95 Figure 66: Add New Camera Timeout Error Message Click over the button to re-initia

Installation of the WeR@Home™ System 96 WeR@Home™ System User Guide 14. Clicking over the button will enlarge this sub-window for further poss

Installation of the WeR@Home™ System System User Guide 97 15. Carefully insert the batteries’ cover back to place and firmly close it down. 16.

Installation of the WeR@Home™ System 98 WeR@Home™ System User Guide Note: Advanced Configuration of the Camera can be found in paragraph 4.5.4

Installation of the WeR@Home™ System System User Guide 99 3.7.1 The Motion Detector Function The Motion Detector incorporates the following fun